Readers ask: Dell Xps Desktop How To Remove The Metal Plate?

How do you remove a blanking plate?

Using a metal pry tool or a flat screwdriver, slowly remove the Blanking Plate by starting from the sides until the plate is completely detached. Note: Use the pry tool with caution to avoid scratches on the paint.

How do you take the cover off a Dell XPS?


  1. Place the computer in an upright position.
  2. Remove the screw (#6-32xL7-12) that secures the right-side cover release latch to the chassis.
  3. Pull the right-side cover release latch.
  4. Lift the right-side cover and then slide it towards the top of the computer.
  5. Remove the right-side cover from the chassis. Figure 1.

How do you remove expansion slot cover?

Free the expansion card’s slot cover: Unscrew the screw or release the latch holding the slot cover in place. Ensure that no cables are attached to the expansion card or in its way. Gently pull out the card. Pinch the card with your fingers and thumb and gently ease it out.

How do you remove Clipsal switch mechanism?

The Procedure

  1. Step 1: De-energize the circuit and verify that power has been cut.
  2. Step 2: If your wallplate looks similar to the above, and no screws are visible, then you will need to remove the fascia.
  3. Step 4: Remove the wallplate from the wall.
  4. Step 5: Identify your bad switch and remove it from the plate.
You might be interested:  Often asked: How Do I Remove Metal Scratches From Porcelain Dishes?

How do you disassemble a desktop computer?

Computer disassembly

  1. Step 1 – Unplug your computer and peripheral items.
  2. Step 2 – Remove side covers.
  3. Step 3 – Disconnect connectors.
  4. Step 4 – Remove standalone fans.
  5. Step 5 – Remove the storage drive.
  6. Step 6 – Remove memory (RAM) modules.
  7. Step 7 – Remove power supply unit.

How do I open my computer tower?

How to Open a Desktop Computer Case

  1. Turn the Computer Off. © Edward Shaw/E+/Getty Images.
  2. Unplug the Power Cable. Unplug the Power Cable.
  3. Remove All External Cables and Attachments. Remove All External Cables and Attachments.
  4. Remove the Side Panel Retaining Screws.
  5. Remove the Case Side Panel.

How do I remove my graphics card cover?

Place a screwdriver on the cover and strike it. Then you can twist the cover to break it free.

Can you remove PCI slot?

Remove the screw holding the PCI Express card in place. Push up on the back metal to loosen the back of the card. On the front of the PCI Express slot, there’s usually a tab holds the front of the card in place. Gently press this tab and hold it in place while you are removing the card.

How do I remove my graphics card slot?

Gently pull on the expansion slot lever to unlock the card from the slot. 5. Slide the card out of the graphics slot, and remove it from the computer.

Leave a Reply

Your email address will not be published. Required fields are marked *